Plots for the SLODAR Tololo campaign

1. Seeing (total, free atmosphere) from Slodar and MASS-DIMM:
yymmddslosee.agr --> yymmddslosee.png. Produced by slosee.sh that
calls awk scripts to extract data. 

2. SLODAR profile: yymmddsloprof.ps  (also .png)

3. SODAR profile: yymmddsodprof.ps (also .png)

4. Integrals in the ground layer from MASS-DIMM, SLODAR, SODAR:
   yymmddglsee.ps 

5. Integrals in the ground layer, 0.5-km layer and above from
MASS-DIMM and Slodar: yymmddmdseeing2.ps. Produced by mdseeing2.pro,
temporal binning 12min (0.2h). The ASCII data are in the files
yymmddmdseeing2.dat.

6. X-Y comparisons of the integrals in the ground layer, 0.5-km layer,
and above from MASS-DIMM and Slodar: mdslo[012].agr (and .png), where
0 is for ground layer, 1 for 0.5 km and 2 for high layer. Produced by
mdslo.sh from the ASCII data above.  

7. Comparison of Slodar profiles (wide binary case) binned in
20-min. with the SODAR profiles: yymmddslosod.ps. Produced by
slosod.pro. 

8. Same comparison, but for a selected UT interval:
  yymmdd_hhmm_llslosod.ps produced by slosodsel.pro

Here, we select the SODAR profils between hh:mm and hh:mm+ll. The
corresponding SLODAR data start 20 min. earlier, given that Sodar
profiles are labelled by the end-of-accumulation time. Thus, the
duration of time-averaged interval is ll+20 min.


9. "Summary" plots night-per-night: nov24.ps etc., produced by xfig.