ISPI Start-Up procedure
Normal Startup
Check all desktops on
the observers console to be sure there is NOT a "TightVNC:
ispi's X desktop (ctioa9:9)" already running.
- If there IS NOT already a "TightVNC: ispi's X desktop
(ctioa9:9)" running then
- Single click on the 'ISPI
VNC' button
on the left of the screen. (IF button doesn't work, then in a
terminal window, at the prompt type: display_ispi). This will
pop up a vnc view
desktop. The desktop will have an xload window with 4 buttons.
One of these is labeled 'ArcVIEW.'
- Single click on the
'ArcVIEW' button. This will pop up the ISPI Control
GUI (with the really cool cross section view of ISPI), and an 'ArcVIEW Main Application'
window. The Application
window should have two round buttons, labelled 'Connected?' that appear
red.
- On the ISPI Control GUI, there is a white arrow icon in the
upper left corner of the window. Single
click on the white arrow. This arrow should now turn black. The
two
buttons in the Application window should turn green.
- Minimize the Application window by clicking on the underscore '_'
icon on the blue bar,
in the upper right corner of each window. You are now
ready to
operate ISPI.
- If there IS already a "TightVNC: ispi's X desktop (ctio:9)"
running, it
can be in a couple of states:
- There is only the gray desktop with an xload window that
has 4 buttons labelled ArcVIEW, IRAF, Vacuum and
terminal If this is the case:
- Single click on the
'ArcVIEW' button. This will pop up the ISPI Control
GUI (with the really cool cross section view of ISPI), and an 'ArcVIEW Main Application'
window. The Application
window should have two round buttons, labelled 'Connected?' that appear
red.
- On the ISPI Control GUI, there is a white arrow icon in the
upper left corner of the window. Single
click on the white arrow. This arrow should now turn black. The
two
buttons in the Application window should turn green.
- Minimize the Application window by clicking on the underscore
'_' icon on the blue bar,
in the upper right corner of each window. You
are now
ready to
operate ISPI.
- The ISPI Control GUI (with the really cool cross section
view of
ISPI) is already displayed on the desktop. In this case, Check the
color of the arrow icon in the upper left
corner of the ISPI Control GUI window.
- If the arrow is white then Single
click on the white arrow. This arrow should now turn black. The
two
buttons in the Application window should turn green.
- If the arrow is black then you are already ready to
operate ISPI, however CHECK the
'ArcVIEW Main Application' window to see that the 'Connected?'
buttons are green. If you cannot see
the 'ArcVIEW Main Application' window, you can find or open it by
clicking on the bar at the bottom of the VNC desktop window.
July 07, 2005; Bob Blum