ARCoIRIS Startup Guide

Startup

1) Make sure that all dome lights are off

2) Logon to the observer2 console:

  • username: tspec
  • password: ********

3) Open a terminal window on observer2

4) Start the vncviewers that control the instrument

  • realvnc -Shared tspec0.ctio.noao.edu:9 &
    • password: ********
    • This vncviewer displays the acquisition GUI and slit viewing camera
    • realvnc is preferred over vncviewer because it allows the observer to hear a beep upon completion of an image.
  • vncviewer -Shared tspec1.ctio.noao.edu:8 &
    • password: ********
    • This vncviewer displays the spectra
  • vncviewer -Shared tspec1.ctio.noao.edu:9 &
    • password: ********
    • This vncviewer displays temperature telemetry of the spectrograph and can be considered optional is monitor display space is limited
  • vncviewer -Shared ctio4r.ctio.noao.edu:3 &
    • password: ********
    • This vncviewer displays a GUI that controls the Blanco dame flat field lamps and can be considered optional.  If this display is not used the telescope operators will have to set the intensity of the dome lamps for flat fields. 

5) Start the instrument software

  • Click on the "start_TS4" icon on the tspec0:9 vncviewer window
  • This should open the observing GUI in addition to other windows

6) Check that the proposal information (PI and proposal ID) is correct in the main application GUI

7) Check that the date is correct for the image directory.  This should be the calendar date for the start of the night.

8) Open necessary windows for observing and data acquisition from the Imager Detector window.  These are:

  • Guider Settings

  • Box Profile Tool

  • Grid Tool

  • Offset Tool

  • Zoom1 Tool

  • Zoom2 Tool

  • Zoom3 Tool

  • Zoom Guider Tool

9) Prepare for calibrations

  • Make sure that dome lights are off
  • Make sure that the spectrograph detector is on and the imager detector is off

10) Take calibrations

11) Prepare for the beginning of the night

Shutdown

1) Exit the observing application