CCD-world: 1x1K Chip

[Paul.Jorden at eev.com]

The following was posted to CCD-world:

Peter,

 > We are seeeking to purchase a THINNED 1K x 1K x 15 micron pixel scientific
 > CCD for use in a a fibre fed spectrograph. The chip is mounted at the
 > focus
 > a small Schmidt camera and needs to have the smallest posible package to
 > avoid unacceptable vignetting of the camera beam.
 >
  > All of the current commercial 1K x 15 micron chips that I have data sheets
 > for are 1x2K frame transfer (1x1K active) chips and this would deliver
 > unacceptabe vignretting.  Is there a supplier out there or a group with
 > suitable chips in stock that could fill this requirement ?
 >
Look at our web site and you will see details of the CCD47-10.
[The data sheet on the www is for the frontside version however]
This is 1k*1k, 13 um pixels, available thinned, AIMO (MPP) or non-IMO.

However, the standard ceramic package is probably too large for your application- but certainly a chip with the required full-frame format exists.
Let me know if you're interested; we could discuss re-packaging, although there would be NRE costs involved.

Does anyone else want the same thing?

Best Wishes for the New Year to yourself & all ccd-worlders,
Paul
_______________________________________________________________
Please note change of name from 'EEV' to  'Marconi Applied Technologies'.
_______________________________________________________________
Dr Paul Jorden,  CCD Sensors, Marconi Applied Technologies
Waterhouse Lane, Chelmsford, Essex, CM1 2QU, UK
Tel:      44 (0) 1245 -453458 (direct), -493493 (switchboard)
Fax:      44 (0) 1245 453224
http://www.marconi-technologies.co.uk/products/ccd/ccdprod.html

- -- CCD-world -- --
CCD-world is fully moderated. Send posts to CCD-world at astro.ku.dk
Standard replies will go to the list; address personal replies manually.
For more information, please go to:  http://www.not.iac.es/CCD-world/